Products
Clean Steam Products Back to all Clean Steam Products
- In this category:
- Hygienic Balls Valves
- Check Valve
- Sample Cooler
- Sight Glass
- Clean Steam Separators
- Vacuum Breaker
- High Purity Ball Valves
Hygienic Balls Valves
Hygienic Balls Valves
Specifications
Contact Us for more information on this product and to see other sizes that fit unique applications.
Typical Applications
M3H three pieces body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as a control valve and should only be used as an isolating valve, fully open or fully closed. The product is mainly designed for the pharmaceutical, biotech, semiconductor, cosmetics, fine chemical, food and beverage industries.
Check Valve
Check Valve
Specifications
| Model | SRT10- Vertical Installation
SRTH10 – Horizontal Installation |
| Service | Clean Steam, water and other gases and liquids compatible with the construction |
| Sizes | ½” to 4” |
| Connections | Clamp ferrules or others on request |
| Body Material | Stainless Steel |
| Max. Operating Temperature (steam and water) – EPDM seals | 356°F |
| Max. Operating Temperature (air and other gases) – EPDM seals | 302°F |
| Max Operating Temperature -PTFE seals | 392°F |
| Minimum Operating Temperature | 14°F |
| Internal RA Finish | 0.51 micron; 20.0787 microinches |
| External RA Finish | 0.76 micron; 29.9213 microinches |
Contact Us for more information on this product and to see other sizes that fit unique applications.
How It Works
The SRT10 all stainless-steel disc check valve has a compact design and is specially designed for use with clean steam, hot condensate and other process fluid applications. They are particularly recommended for high purity applications
Will be assembled and packaged in a clean room certified according to ISO 14644-1. These products are end capped and sealed with recyclable thermo-shrinkable plastic film, to avoid contamination.
Sample Cooler
Sample Cooler
Specifications
| Model | SC32P – permanent sampling
SC32PP – portable design |
| Service | Steam boilers
Hot water Systems |
| Sizes &
Connections |
Cooling water inlet/outlet: ½” on body (BSP or NPT) or ¾” tri-clamp
Sample tube inlet/outlet: 8mm O/D Alternative ½” tri-clamp compatible |
| Limiting Conditions
– Pressure
– Temperature |
Body
290psig (20 Bar)
248° F (120° C) |
| Limiting Conditions
– Pressure
– Temperature |
Coil
SC32P:1595 psig (110 Bar) SC32PP: 1305 psig (90 Bar)
SC32P: 752° F (400° C) SC32PP: 842° F (450° C) |
| Internal RA Finish | 0.51 micron; 20.0787 microinches |
| External RA Finish | 0.76 micron; 29.9213 microinches
|
Contact Us for more information on this product and to see other sizes that fit unique applications.
How It Works
ADCA sample coolers are specially designed to cool samples of boiler water or steam for analysis. Sample coolers prevent steam flashing-off from hot pressurized liquid samples, which can be dangerous and may result in an incorrect water sample. This device may be used for boiler water analysis and other sampling or cooling applications compatible with the construction materials.
Will be assembled and packaged in a clean room certified according to ISO 14644-1. These products are end capped and sealed with recyclable thermo-shrinkable plastic film, to avoid contamination.
Sight Glass
Sight Glass
Specifications
| Model | SWS |
| Service | Water and other gases and liquids compatible with the construction |
| Sizes | ½” to 4” |
| Connections | Clamp ferrules or others on request |
| Max. Operating Temperature (steam and water) – EPDM seals | 356°F |
| Max. Operating Temperature (air and other gases) – EPDM seals | 302°F |
| Max Operating Temperature -PTFE seals | 392°F |
| Minimum Operating Temperature | 14°F |
| Internal RA Finish | 0.51 micron; 20.0787 microinches |
| External RA Finish | 0.76 micron; 29.9213 microinches |
Contact Us for more information on this product and to see other sizes that fit unique applications.
How It Works
The SWS sanitary sight glasses are designed to monitor liquid flow in any direction. Sight glasses (or flow indicators) are usually employed to detect either the presence or absence of fluid flow, turbulence, color, etc. They are specially recommended for high purity applications.
Will be assembled and packaged in a clean room certified according to ISO 14644-1. These products are end capped and sealed with recyclable thermo-shrinkable plastic film, to avoid contamination.
Clean Steam Separators
Clean Steam Separators
Specifications
| Model | S10H
S10HA- with air vent connection |
| Service | Steam, compressed air, and other gases |
| Sizes | ½” to 3” |
| Connections | Clamp ferrules ASME BPE
Other Sanitary clamp or tube weld connections available on request |
| Model | S10HV |
| Service | Steam, compressed air, and other gases |
| Sizes | ½”, ¾”, 1”, 1½”, and 2” |
| Connections | Clamp ferrules ASME BPE
Other Sanitary clamp or tube weld connections available on request |
| Model | S11
S11A- with air vent connection |
| Service | Steam, compressed air, and other gases |
| Sizes | ½”, ¾”, 1”, 1½”, and 2” |
| Connections | Clamp ferrules ASME BPE
Other Sanitary clamp or tube weld connections available on request |
Contact Us for more information on this product and to see other sizes that fit unique applications.
Typical Applications
When wet steam is used in sterilization, moisture in suspension reduces the heat transfer efficiency, and the validity of the sterilization process can be compromised. S10H series baffle separators remove moisture from steam pipelines. Steam passes through the separator and as a result of expansion, impact and swirling effects, the particles with a heavier specific gravity are separated, such as water droplets and moisture in suspension. The condensate collected at the bottom of the separator must be automatically drained by a suitable steam trap.
When wet steam is used in sterilization, moisture in suspension reduces the heat transfer efficiency, and the validity of the sterilization process can be compromised. S10HV series centrifugal separators remove moisture from steam pipelines. Steam passes through the separator and as a result of centrifugal forces, impact and swirling effects, the particles with a heavier specific gravity are separated, such as water droplets and moisture in suspension. The condensate collected at the bottom of the separator must be automatically drained by a suitable steam trap.
When wet steam is used in sterilization, moisture in suspension reduces the heat transfer efficiency, and the validity of the sterilization process can be compromised. S11 series centrifugal separators remove moisture from steam pipelines. Steam passes through the separator and, as a result of centrifugal forces, impact and swirling effects, the particles with a heavier specific gravity are separated, such as water droplets and moisture in suspension. The condensate collected at the bottom of the separator must be automatically drained by a suitable steam trap.
Vacuum Breaker
Vacuum Breaker
Specifications
| Model | VB16C |
| Service | Saturated steam and other gases compatible with the construction |
| Sizes | 1” – DN 25 |
| Connections | ASME BPE, DIN and ISO
Clamp ferrules or others on request |
| Max. Operating Pressure | 188.5 psig @ 100.4°F |
| Max. Operating Steam Pressure | 87 psig |
| Max Operating Temperature (steam and water) | 338°F |
| Minimum Operating Temperature | 14°F |
| Internal RA Finish | 0.51 micron; 20.0787 microinches |
| External RA Finish | 0.76 micron; 29.9213 microinches |
Contact Us for more information on this product and to see other sizes that fit unique applications.
How It Works
The VB16C vacuum breakers are simple and reliable devices that automatically relieve or “break” an unwanted vacuum condition, restoring the atmospheric pressure. This device is particularly suitable for steam heated units of small and medium volume, such as heat exchangers, heating coils, calorifiers, jacketed kettles, steam boilers, etc.
Will be assembled and packaged in a clean room certified according to ISO 14644-1. These products are end capped and sealed with recyclable thermo-shrinkable plastic film, to avoid contamination.
High Purity Ball Valves
High Purity Ball Valves
Specifications
| Model | M3HP True Bore (DN10-50 DIN), M3HP True Bore (1/2”-2” ASME BPE) |
| Service | Clean Steam, gases, and liquids compatible with the construction |
| Sizes | DN 10 to DN 50, ½” to 2” |
| Connections | According to DIN 11850 tube, According to ASME BPE
TC – Sanitary clamps DIN 32676, TC – Sanitary clamps ETO – Extended tube orbital welding TC/ETO – Combination |
| Model | M3HP True Bore (6” ASME BPE) |
| Service | Clean Steam, gases, and liquids compatible with the construction |
| Sizes | 6” |
| Connections | According to ASME BPE
TC – Sanitary clamps ETO – Extended tube orbital welding TC/ETO – Combination |
| Model | M3HP True Bore (2-1/2” – 4” ASME BPE), M3HP Full Bore (DN65-100 DIN) |
| Service | Clean Steam, gases, and liquids compatible with the construction |
| Sizes | 2½” to 4”, DN65 to DN100 |
| Connections | According to ASME BPE, According to DIN 11850 tube
TC – Sanitary clamps , TC – Sanitary clamps DIN 32676 ETO – Extended tube orbital welding TC/ETO – Combination |
Contact Us for more information on this product and to see other sizes that fit unique applications.
Typical Applications
M3HP three-piece body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as a control valve and should only be used as an isolating valve, fully open or fully closed. The product is mainly designed for the pharmaceutical, biotech, semiconductor, cosmetics, fine chemical, food and beverage industries.