Products
Steam Traps Back to all Steam Traps
Thermostatic Steam Trap
WT1000
Specifications
| Model | WT1000 |
| Sizes | 1/2’’, 3/4’’ |
| Connections | NPT |
| Body Material | Stainless Steel |
| PMO (Max. Operating Pressure) | 300 PSIG |
| TMO (Max. Operating Temperature) | Saturated Steam Temperature |
| PMA (Max. Allowable Pressure) | 1032 PSIG @ 100°F |
| TMA (Max. Allowable Temperature) | 750°F @ 800 PSIG |
Contact Us for more information on this product and to see other sizes that fit unique applications.
Typical Applications
The WT1000 thermostatic steam trap was specifically designed for drip and tracing applications as well as an air vent for heat exchangers. Like all thermostatic traps, the WT1000 is small, light, and has excellent air handling capabilities. The discharging of air on start-up allows steam to enter the system more quickly.
Thermostatic Steam Trap
WT2000
Specifications
| Model | WT2000 (Non-Repairable) |
| Sizes | 1/2’’, 3/4’’ |
| Connections | NPT |
| Body Material | Stainless Steel |
| PMO (Max. Operating Pressure) | 650 PSIG |
| TMO (Max. Operating Temperature) | Saturated Steam Temperature |
| PMA (Max. Allowable Pressure) | 1032 PSIG @ 100°F |
| TMA (Max. Allowable Temperature) | 750°F @ 800 PSIG |
Contact Us for more information on this product and to see other sizes that fit unique applications.
Typical Applications
The WT2000* thermostatic steam trap is used for drip, tracing, and process applications. Their compact size, all stainless-steel construction, excellent air & handling capabilities, and the ability to operate over a wide & pressure range make them a good choice for most applications. They can also be used as an air vent on heat exchangers. Thermostatic traps are far superior to bucket traps and thermodynamic traps in their ability to remove air from the system. The discharging of air on startup allows steam to enter the system more quickly.
*WT2001 refer to 3/16″ orifice size and should be used on all drip and tracing applications, WT2003 refer to 5/16″ orifice size.
Thermostatic Steam Trap
WT2500
Specifications
| Model | WT2500 (Repairable) |
| Sizes | 1/2’’, 3/4’’ |
| Connections | NPT |
| Body Material | Cast Iron |
| PMO (Max. Operating Pressure) | 250 PSIG |
| TMO (Max. Operating Temperature) | 406°F |
| PMA (Max. Allowable Pressure) | 250 PSIG up to 450°F |
| TMA (Max. Allowable Temperature) | 450°F @ 250 PSIG |
Contact Us for more information on this product and to see other sizes that fit unique applications.
Typical Applications
The WT2500* thermostatic steam trap is used for drip, tracing and process applications. Their compact size, excellent air handling capability and wide operating pressure range make them a great choice for most applications. Thermostatic traps are far superior to bucket traps and thermodynamic disc traps in their ability to remove air from the system.
* WT2501 refer to 3/16″ orifice size, WT2503 refer to 5/16″ orifice size.
Thermostatic Steam Trap
WT3000
Specifications
| Model | WT3000 (Repairable) |
| Sizes | 1/2’’, 3/4’’ |
| Connections | NPT, SW, FLG |
| Body Material | Stainless Steel |
| Options | Strainer, Blowdown Valve |
| PMO (Max. Operating Pressure) | 650 PSIG |
| TMO (Max. Operating Temperature) | Saturated Steam Temperature |
| PMA (Max. Allowable Pressure) | 906 PSIG @ 100°F |
| TMA (Max. Allowable Temperature) | 750°F @ 725 PSIG |
Contact Us for more information on this product and to see other sizes that fit unique applications.
Typical Applications
The WT3000* thermostatic steam trap is used for industrial process applications. Their compact size, all stainless-steel construction, excellent air handling capability and wide operating pressure range make them a great choice for most process applications. Thermostatic traps are far superior to bucket traps and thermodynamic disc traps in their ability to remove air from the system.
* WT3001 refer to 3/16″ orifice size, WT3003 refer to 5/16″ orifice size.
Thermostatic Steam Trap
WT4000
Specifications
| Model | WT4000 (Repairable) |
| Sizes | 3/4’’, 1’’ |
| Connections | NPT, SW, FLG |
| Body Material | Stainless Steel |
| Options | Strainer, Blowdown Valve |
| PMO (Max. Operating Pressure) | 300 PSIG |
| TMO (Max. Operating Temperature) | Saturated Steam Temperature |
| PMA (Max. Allowable Pressure) | 906 PSIG @ 100°F |
| TMA (Max. Allowable Temperature) | 750°F @ 725 PSIG |
Contact Us for more information on this product and to see other sizes that fit unique applications.
Typical Applications
The WT4000* thermostatic steam trap is used for industrial process applications. Their compact size, all stainless-steel construction, excellent air handling capability and wide operating pressure range make them a great choice for most process applications. Thermostatic traps are far superior to bucket traps and thermodynamic disc traps in their ability to remove air from the system.
* WT4001 refer to 5/16″ orifice size, WT4003 refer to 7/16″ orifice size.
Thermostatic Steam Trap
WT5000
Specifications
| Model | WT5000 (Bi-Metal) |
| Sizes | 3/8’’, 1/2’’, 3/4’’, 1’’ |
| Connections | NPT, SW |
| Body Material | Stainless Steel |
| PMO (Max. Operating Pressure) | 650 PSIG |
| TMO (Max. Operating Temperature) | 662°F |
| PMA (Max. Allowable Pressure) | 900 PSIG |
| TMA (Max. Allowable Temperature) | 800°F |
Contact Us for more information on this product and to see other sizes that fit unique applications.
Typical Applications
The WT5000 Series Bi-metal Steam Trap is used in steam tracing applications (process lines, instrumentation and winterization, general steam jacketing) and small process applications where accurate control of condensate discharge temperature is required to utilize the sensible heat of the condensate.